Removing the display assembly, Prerequisites, Procedure – Dell Inspiron 15 (3537, Mid 2013) User Manual
Page 49
Removing the Display Assembly |
49
Removing the Display Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the battery. See "Removing the Battery" on page 10.
2
Follow step 1 to step 2 in "Removing the Memory Module(s)" on page 12.
3
Follow step 1 to step 3 in "Removing the Hard-Drive Assembly" on page 18.
4
Follow step 1 to step 2 in "Removing the Optical-Drive Assembly" on page 15.
5
Remove the keyboard. See "Removing the Keyboard" on page 21.
6
Remove the palm rest. See "Removing the Palm Rest" on page 24.
Procedure
1
Peel off the tape that secures the display cable to the system board.
2
Disconnect the display cable from the system board.
3
Disconnect the antenna cables from the wireless mini-card.
1
display cable
2
tape
3
antenna cables (2)
2
3
1
OM_Book.book Page 49 Monday, June 10, 2013 3:30 PM