Dell Inspiron M301Z (Mid 2010) - Manual (Page 43)

Replacing the Palm Rest
1. Follow the instructions in Before You Begin .
2. Align the palm rest on the computer base and gently snap the palm rest into place.
3. Slide the touch pad cable and the power button cable into their connectors on the system board and press down on the connector latch to secure the
cables.
4. Replace the five screws that secure the palm rest to the system board.
5. Replace the keyboard (see Replacing the Keyboard ).
6. Turn the computer over and replace the three screws that secure the palm rest to the computer base.
7. Replace the two rubber caps that cover the palm rest screws on the computer base.
8. Replace the module cover (see Replacing the Module Cover ).
9. Replace the battery (see Replacing the Battery ).
Back to Contents Page
1 palm rest 2 plastic scribe
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.