Replacing the display assembly, Procedure, Postrequisites – Dell Inspiron M731R (5735, Late 2013) User Manual
Page 55
Replacing the Display Assembly |
55
Replacing the Display Assembly
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before Working Inside Your
Computer" on page 9. After working inside your computer, follow the instructions
in "After Working Inside Your Computer" on page 11. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Place the display assembly on the computer base and align the screw holes on the
display assembly with the screw holes on the computer base.
2
Replace the screws that secure the display assembly to the computer base.
3
Route the antenna cable through the routing guides on the computer base.
Postrequisites
1
Follow step 5 to step 11 in "Replacing the System Board" on page 42.
2
Replace the wireless card. See "Replacing the Wireless Card" on page 35.
3
Replace the palm rest. See "Replacing the Palm Rest" on page 32.
4
Replace the keyboard. See "Replacing the Keyboard" on page 19.
5
Replace the base cover. See "Replacing the Base Cover" on page 21.
6
Follow step 3 to step 4 in "Replacing the Optical Drive" on page 16.
7
Follow step 3 to step 5 in "Replacing the Hard Drive" on page 26.
8
Replace the battery. See "Replacing the Battery" on page 13.
book.book Page 55 Wednesday, October 2, 2013 3:11 PM