Dell Inspiron M731R (5735, Late 2013) - Manual (Page 37)

Replacing the I/O Board | 37
Replacing the I/O Board
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before Working Inside Your
Computer" on page 9. After working inside your computer, follow the instructions
in "After Working Inside Your Computer" on page 11. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Use the alignment posts on the computer base to place the I/O board in position.
2 Replace the screw that secures the I/O board to the computer base.
3 Adhere the I/O-board cable to the computer base.
4 Slide the I/O-board cable into the I/O-board-cable connector and press down on
the connector latch to secure the cable.
Postrequisites
1 Replace the palm rest. See "Replacing the Palm Rest" on page 32.
2 Replace the keyboard. See "Replacing the Keyboard" on page 19.
3 Replace the base cover. See "Replacing the Base Cover" on page 21.
4 Replace the battery. See "Replacing the Battery" on page 13.
book.book Page 37 Wednesday, October 2, 2013 3:11 PM