Dell PowerVault NX1950 - Manual (Page 31)

Configuring Shared Storage on Your Dell|EqualLogic PS Series Storage Array
31
Figure 5-2. Advanced Settings Window
8 In the Log On to Target window, click OK to complete the login.
9 Confirm the connection by clicking the Targets tab in the Microsoft
iSCSI Initiator Properties window. The target should appear in the list
with the status
Connected .
10 In the Microsoft iSCSI Initiator Properties window, click the Bound
Volumes/Devices tab. To ensure that the volume is available when the
iSCSI service is started by Windows, click Bind All
→ OK.
After the node is connected to a volume’s iSCSI target, it appears as a local
disk (iSCSI disk) in the Disk Management utility.
Book.book Page 31 Monday, February 4, 2008 1:26 PM