Setting up a printer, Printer cable, Connecting a usb printer – Dell Inspiron 5160 User Manual
Page 24

24
Setting Up Your Computer
www
.dell.com | support.dell.com
4 In the next window, click the appropriate option:
•
If you do not have an ISP and want to select one, click Choose from a list of Internet
service providers (ISPs).
•
If you have already obtained setup information from your ISP but you did not receive a
setup CD, click Set up my connection manually.
•
If you have a CD, click Use the CD I got from an ISP.
5 Click Next.
If you selected Set up my connection manually, continue to step 6. Otherwise, follow the
instructions on the screen to complete the setup.
NOTE:
If you do not know which type of connection to select, contact your ISP.
6 Click the appropriate option under How do you want to connect to the Internet?, and then
click Next.
7 Use the setup information provided by your ISP to complete the setup.
If you are having problems connecting to the Internet, see "E-mail, Modem, and Internet
Problems" on page 59. If you cannot connect to the Internet but have successfully connected in the
past, the ISP might have a service outage. Contact your ISP to check the service status, or try
connecting again later.
Setting Up a Printer
NOTICE:
Complete the operating system setup before you connect a printer to the computer.
See the documentation that came with the printer for setup information, including how to:
•
Obtain and install updated drivers.
•
Connect the printer to the computer.
•
Load paper and install the toner or ink cartridge.
•
Contact the printer manufacturer for technical assistance.
Printer Cable
Your printer connects to your computer with a USB cable. Your printer may not come with a printer
cable, so if you purchase a cable separately, ensure that it is compatible with your printer. If you
purchased a printer cable at the same time you purchased your computer, the cable may arrive in
the computer box.
Connecting a USB Printer
NOTE:
You can connect USB devices while the computer is turned on.
1 Complete the operating system setup if you have not already done so.
2 Install the printer driver if necessary. See the documentation that came with your printer.