Entering the bmc setup module, Bmc setup module options – Dell PowerEdge 800 User Manual
Page 22

l
Fault logging and SNMP alerting
l
Access to system event log and sensor status
l
Control of system functions including power on and off
l
Support is independent of the system's power or operating state
l
Provides text console redirection for system setup, text-based utilities, and operating system consoles
For additional information on using BMC, see the documentation for the BMC and systems management applications.
Entering the BMC Setup Module
1.
Turn on or restart your system.
2.
Press
If your operating system begins to load before you press
BMC Setup Module Options
For information about the BMC Setup Module options and how to configure the emergency management port (EMP), see the BMC User's Guide.
Back to Contents Page
NOTE:
To remotely access the BMC through the integrated NIC, you must connect the network connection to integrated NIC1. See
Figure 1
-3
.