Dell Inspiron 23 (5348, Early 2014) - Manual (Page 95)

Replacing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Connect the camera cable to the camera module.
2 Align the screw hole on the ground cable and the camera module with
the screw hole on the display bezel.
3 Replace the screw that secures the ground cable and the camera module
to the display bezel.
Post-requisites
1 Follow the procedure from step 11 to step 17 in "Replacing the Display
Panel ".
2 Replace the system board .
3 Replace the coin-cell battery .
4 Replace the wireless card .
5 Replace the processor .
6 Replace the processor fan .
7 Replace the processor heat-sink .
8 Replace the power-supply unit .
9 Replace the power-supply fan .
10 Replace the optical drive .
11 Replace the I/O bracket .
12 Replace the power-supply diagnostic board .
13 Replace the converter board .
14 Replace the control buttons board .
15 Replace the VESA-mount bracket .
16 Replace the hard drive .
17 Replace the system-board shield .
95