Dell Inspiron 23 (5348, Early 2014) - Manual (Page 51)

Replacing the Power-Supply
Diagnostic Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Connect the power-supply diagnostic board cable to the connector on
the power-supply diagnostic board.
2 Align the screw hole on the power-supply diagnostic board with the
screw hole on the I/O bracket.
3 Replace the screw that secures the power-supply diagnostic board to the
I/O bracket.
Post-requisites
1 Replace the VESA-mount bracket .
2 Replace the system-board shield .
3 Replace the back cover .
4 Replace the stand assembly .
51