Dell Inspiron 23 (5348, Early 2014) - Manual (Page 63)

Replacing the I/O Bracket
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the power port through the I/O bracket.
2 Align the screw holes on the I/O bracket with the screw holes on the
display-panel base.
3 Replace the screws that secure the I/O bracket to the display-panel base.
4 Align the screw holes on the power port with the screw holes on the I/O
bracket.
5 Replace the screws that secure the power port to the I/O bracket.
Post-requisites
1 Replace the power-supply diagnostic board .
2 Replace the VESA-mount bracket .
3 Replace the system-board shield .
4 Replace the back cover .
5 Replace the stand assembly .
63