Dell Inspiron 660s (Early 2012) - Manual (Page 68)

64
Processor
Procedure
1 Press down and push the release lever away from the processor to release it
from the securing tab.
2 Extend the release lever completely to open the processor cover.
CAUTION:
When removing the processor, do not touch any of the pins inside the
socket or allow any objects to fall on the pins in the socket.
3 Open the processor cover and gently lift the processor from the processor
socket.
Replacing the Processor
Procedure
1 Unpack the new processor, being careful not to touch the underside of
the processor.
CAUTION:
You must position the processor correctly in the processor socket to
avoid damage to the processor.
2 If the release lever on the socket is not fully extended, move it to that
position.
3 Orient the alignment notches on the processor with the alignment tabs on
the socket.
1 securing tab 2 release lever
3 processor
2
1
3
book.book Page 64 Thursday, April 5, 2012 5:38 PM