Canon VK-64 User Manual

Page 48

Storage Server Configuration Dialog

●

Event Notification Tab

The Storage Server Configuration dialog, Event Notification tab allows you to
configure.

E-mails are sent according to the priorities set in the Events tab.

Example event notification e-mail

An event of priority 3 occurred on 12/05/2006 at 15:15:17 +1000.

Parking Lot 1: Sensor on

Enable e-mail notification and select
a priority. Events of that priority and
above will lead to notification e-
mails.

Enter the e-mail subject line, for
example, “Immediate Action
Required”. Enter the address of the
recipient and enter your from
address.

Enter a Host Name or IP address
and Port Number of mail server for
outgoing mail.

Enable authentication (POP-before-
SMTP) for connection and enter
User Name, Password and POP
Server details.
If this is enabled, the Storage
Server will attempt to perform a
POP login before sending e-mail
that may be required for some
SMTP servers.

You can only register one e-mail address in the To Address field.
If you want to send the e-mail to multiple addresses, use a group
address.

Tip