Operating environment, Supported camera servers, Firmware upgrade – Canon VK-64 User Manual
Page 22

Operating Environment
22
Supported Camera Servers
The table below lists the Camera Servers that are supported by VK-64/VK-16.
This information is correct as of January 2007. For the latest information, please
refer to our WebView Product web page:canon.com/webview
Firmware Upgrade
The latest information concerning firmware can be found on the following Canon Web site:
canon.com/webview
Camera Server
Firmware Versions
VB-C300
Ver. 1.0
VB-C50FSi
Ver. 1.0 Rev. 68 or later
VB-C50FSi
Ver. 1.0 Rev. 68 or later
Ver. 1.0 Rev. 26 or later
VB150
Ver. 1.1 Rev. 39 or later
VB101
Ver. 3.0 Rev. 69 or later
VB-C50iR
VB-C50i
VB-C10R
VB-C10
Ver. 1.1 Rev. 33 or later
Ver. 1.2 Rev. 76 or later
If using a VB101, you can make use of a single camera
connected with VK-64/VK-16 at a time.
If using a VB150 with multiple cameras, there are restrictions
on frame rate.
If using the Simultaneous mode with the VB150, upgrade the
firmware to Version 1.1 Rev.39 or later.
Note