Casio EXILIM EX-FC150 - Manual (Page 57)

57
Recording Movies
Recording Movies
The following procedure explains how to record a standard (STD) movie.
See the pages indicated below for more information about movies.
High-definition movie (HD movie): page 60
High speed movie (HS movie): page 60
1.
In the REC mode, set the movie
mode switch to ³ (HD/STD).
2.
Press [MENU].
3.
Use [4] and [6] to select the “Quality” tab.
4.
Use [8] and [2] to select “» Quality” and then press [6].
5.
Use [8] and [2] to select “STD” (Standard),
and then press [SET].
• Recording is performed with an aspect ratio of
4:3, an image size of 640 x 480 pixels, and a
frame rate of 30 frames per second (STD Movie).
Image size setting cannot be changed.
• The semi-transparent gray frame on the monitor
screen indicates the area that is recorded when
shooting a movie. The area within the frame is
recorded for a movie.
6.
Press [0] (Movie).
This will start recording and display Y on the
monitor screen.
Movie recording includes monaural audio.
7.
Press [0] again to stop recording.
Movie recording also will stop automatically if
memory becomes full before you press [0].
• The maximum size allowed for a single movie file
is 4GB. Movie recording stops automatically
when a file becomes 4GB.
To record a movie
Movie mode
switch
[0] (Movie)
Semi-transparent gray
frame
Recording time
Remaining recording time
(page 185)