Casio EXILIM EX-FC150 - Manual (Page 34)

34
Snapshot Tutorial
IMPORTANT!
• You may not be able to achieve the brightness you want when shooting an image
that is very dark or very bright. If this happens, use the M mode to adjust the
aperture or shutter speed manually.
• “S Image AS” (page 92) does not work in the S mode and M mode. You can,
however, turn on “A Camera AS”, if you like.
• In the S mode, ISO sensitivity (page 39) always operates according to its “AUTO”
setting. The ISO sensitivity setting cannot be changed while in the S mode.
• While A, S, or M is selected for the exposure mode, the flash will not fire if > (Auto
Flash) or ¥ (Red Eye Reduction) is selected as the flash mode. If you want the
flash to fire, select < (Flash On) as the flash mode.
S S (Shutter Speed Priority) mode
In this mode, you select the shutter speed and other
settings are adjusted accordingly.
1 Press [SET] to open the control panel.
2 Use [8] and [2] to open the fifth control panel
option from the top (shutter speed, EV Shift).
3 Use [8] and [2] to select the shutter speed setting,
and then use [4] and [6] to change it.
• The ISO sensitivity, shutter speed and aperture value
on the monitor screen will turn orange when you half-
press the shutter button if the image is over-exposed
or under-exposed.
• If you are using manual focus (page 89), use [4] and [6] to focus the image.
M M (Manual Exposure) mode
This mode gives you total control over aperture and
shutter speed settings.
1 Press [SET] to open the control panel.
2 Use [8] and [2] to open the fifth control panel
option from the top (aperture, shutter speed).
3 Use [8] and [2] to select the aperture setting, and
then use [4] and [6] to change it.
4 Use [8] and [2] to select the shutter speed setting,
and then use [4] and [6] to change it.
• If you are using manual focus (page 89), use [4] and
[6] to focus the image.
Shutter speed
Shutter speed
Aperture value