Combi 8100 User Manual

Page 23

Place harness straps over child’s shoulders
and thighs.

For information on harness operation and
use, see “Harness Use and Adjustment”
section.

Buckle Harness:

- Place top of buckle tongues together and

insert buckle tongues into buckle (fig. b).
You should hear a click.

- Pull up on tongues to be sure they are

locked.

Pull harness adjuster strap (fig. c) to snugly adjust
harness straps.

- Check that harness straps are snug on

shoulder and thighs. Straps should not
allow a finger to pass between the belt
and the child’s shoulder.

- A snug harness strap should not allow

any slack. It lies in a relatively straight
line without sagging. It does not press
on the child’s flesh or push the child’s
body into an unnatural position.

NOTE: If harness can not be snugly

adjusted as described above,
do not use this car seat.

(fig. b)

Click

(fig. c)

Harness

Adjuster

Strap

Pull

Close chest clip and position chest clip at
arm pit level (fig. d).

Small infants:

For a small infant, a rolled towel can be used on
each side for support (fig. d). Towels MUST not
interfere with the ability to snugly adjust the
harness system. DO NOT place towel or
other items behind infant or between infant
and harness.

(fig. d)

Chest Clip

Rolled Towel