Canon imageCLASS MF4100 Series - Manual (Page 11)

Set the Machine for Receiving Faxes
(MF4140/MF4150 Only)
Select the Receive Mode that Suits Your Needs
Follow the chart below to determine the correct receive mode for your needs.
NOTE
– The answering machine must be connected directly to the machine for to work. (See “Connect Telephone
Cables,” on p.9.)
– The external telephone must be connected to the machine for or to work. (See “Connect Telephone
Cables,” on p.9.)
– Voice mail is not supported with .
– The mode is available for certain countries only and requires subscription to a network switch service.
Contact your telephone company for availability.
Do you intend to use the machine to
receive voice calls? No
Answers all calls as faxes.
Do you intend to use an answering
machine with the machine? Yes
Receives faxes automatically
and records voice messages.
Do you intend to receive faxes
automatically? No
Does not answer any calls.
You have to manually receive
faxes.
Switches between fax and
voice calls automatically if an
external telephone is
connected to the machine.
Yes
No
Yes
Do you subscribe to a NET SWITCH
service? No
Yes
Distinguishes between fax and
voice calls.
Set the Receive Mode
1
Press [Additional
Functions].
2
Use [ ] or [ ] to
select <5 FAX SETTINGS>,
then press [OK].
3
Use [ ] or [ ] to
select <3 RX SETTINGS>,
then press [OK].
4
Use [ ] or [ ] to
select <3 RX MODE>,
then press [OK].
5
Use [ ] or [ ] to
select the receive mode,
then press [OK].
NOTE
– For , make sure
an answering machine is
connected to the machine.
– If or
is selected, you can select
some settings as below:
–
–
–
–
–
6
Press [Stop/Reset] to
return to the standby
mode.
NOTE
For details, see Chapter 1,
“Setting the Receive Mode” in
the Advanced Guide.
19 20