Compaq MP4800 - Manual (Page 31)

Using the On-Screen Display Menu
Compaq iPAQ Microportable Projector MP4800 User’s Guide 3–7
Explaining Functions in the On-Screen
Display Menu
■ Brightness—Adjusts the displayed image brightness. The
default brightness value is 50%, and the settings range from
0 to 100. Press the
Minus (-) button to darken the image. Press
the Plus (+) button to lighten the image.
■ Contrast—Adjusts the displayed image contrast by changing
the amount of black and white in the image. The default
contrast value is 50%, and the settings range from 0 to 100.
Press the
Minus (-) button to decrease the contrast. Press the
Plus (+) button to increase the contrast.
■ Image Control—Improves picture stability of user modes by
adjusting:
❏ Horizontal and Vertical Position—Fine-tunes the
horizontal and vertical positions of the display.
❏ Clock—Increases/decreases the value to stretch or shrink
the image on the screen. This selection is not available
when a source is connected to the DVI connector.
Factory Reset Yes
No
Exit
On-Screen Display Menu Adjustments (Continued)
Main Menu Menu Level 2 Menu Level 3
261794-001.book Page 7 Tuesday, January 22, 2002 2:20 PM