Compaq MP4800 - Manual (Page 17)

2–6 Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the Projector
1. Connect one end of the signal cable 1 into the side of the
projector and connect the other end to the VGA-out PC Card.
The VGA-out PC Card may be inserted into the PC slot on
the Compaq Pocket PC before or after connecting the signal
cable.
✎
Be sure the signal cable aligns with the connector. Do not force
the cable onto the connector or you may damage the signal cable
or the projector.
2. Connect one end of the power cord 2 into the side of the
projector, and the other end to an electrical outlet that is
easily accessible and close to the projector.
261794-001.book Page 6 Tuesday, January 22, 2002 2:20 PM