Compaq MP4800 - Manual (Page 21)

2–10 Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the Projector
Adjusting the Projected Image
There are three ways to adjust the projected image:
■ Adjusting the projector height
■ Adjusting the image size
■ Adjusting the projector focus
Adjusting the Projector Height
The projector has a built-in elevator foot that can raise the
projector approximately 1 inch (2.54 cm).
Ä CAUTION: If the projector is mounted to a tripod, do not use the
elevator foot.
To adjust the height:
1. Raise the projector to the desired display angle, then press the
elevator button 1 to release the elevator foot 2.
2. To lower the display angle, press the elevator button again
and press down on the projector to lower it.
Ä CAUTION: Failure to press the elevator button before adjusting the
elevator foot can result in damage to the elevator mechanism.
261794-001.book Page 10 Tuesday, January 22, 2002 2:20 PM