Compaq iP-25E - Manual (Page 29)

E-29
Operation with the Projector
The ability to turn on and turn off the pointer is not avail-
able from the operation panel of the projector.
Operation with the Remote Control
Press the POINTER/SET button.
One more press of the POINTER/SET button while the
pointer is displayed will turn off the pointer display.
Moving the Pointer
Operation with the Projector
Press the SCROLL (
̆̄̇̈) buttons.
Operation with the Remote Control
Press the SCROLL (
̆̄̇̈) buttons.
See Page E-35 for information about the form, color, and size of the pointer.
Regular Operation
Displaying the Pointer
This operation displays the pointer in the currently projected image.
NOTE:
• When the brightness is adjusted while the pointer is displayed, the pointer will disappear temporarily; however, it will reappear
soon.
Deleting the Projection Image and Audio
This operation deletes the currently projected image and audio without switching off the lamp.
Operation with the Projector
The ability to delete the projection image is not available from the
operation panel of the projector.
Operation with the Remote Control
Press the MUTE button.
NOTE: When a fixed period of time elapses (about 30 minutes) with the video/audio muted, a message will be displayed to check
whether to shut down the projector. Selection of "Yes" will set the projector to the standby mode, while a selection of "No" will again
delete the video/audio.
When there has been an absence of an operation for 15 seconds during the display of the above confirmation message, the
projector automatically enters the standby mode.