Names and functions of the parts (remote control), E-12 – Compaq iP-25E User Manual

Page 12

E-12

Names and Functions of the Parts (Remote Control)

1. POWER Button

Switches the power of the projector on or off (standby mode).

• Only this button is effective when the projection lamp is

off.

See Page E-21.

2. MUTE Button

Temporarily blanks the projection screen without switching

off the lamp. One more press causes the screen to return

immediately.

See Page E-29.

3. VOLUME Buttons

These buttons adjust the volume when the PC or video is

selected.

See Page E-28.

4. BRIGHTNESS Buttons

These buttons adjust the brightness of the projection screen.

See Page E-25.

5. ZOOM Buttons

These buttons adjust the magnification of the projection

screen.

See Page E-24.

6. MENU Button

Switches on or off the display of the menu screen.

See Page E-32.

7. SCROLL Buttons

Sets the selection of the item or the adjustment value at the

menu screen. Moves the zoom position during a zoom dis-

play. Moves the pointer when the pointer is being displayed.

See Pages E-23, 24, 27 and 29.

8. SET/POINTER Button

During menu display, this button advances the menu to the

next level. This button finalizes the setting at the time of item

selection. See Pages E-29 and 32. This button displays a

pointer when the menu screen is not displayed. Press this

button one more time to make the pointer disappear.

9. PORTRAIT Button

Selects the orientation of the projection screen. The display

of the switched screen is adjusted to match the width.

See Page E-23.

10. FREEZE/CAPTURE Button

Makes the projection screen image into a still image. In the

OHP mode, the image is stored in internal memory as a

thumbnail.

See Page E-26.

11. FREEZE OFF Button

Cancels the still image mode.

This is used when checking the projection screen while mov-

ing the document.

See Page E-27.

12. OHP Button

Switches the projector to OHP input. See Page E-23.

13. PC Button

Switches the projector to PC input. See Page E-23.

14. VIDEO Button

Switches the projector to video input. See Page E-23.

15. THUMBNAIL Button

Displays the captured still image as a thumbnail.

See Page E-27.

12
13
14

A Check of the Supplied Items and the Names of the Parts