Compaq iP-25E - Manual (Page 24)

E-24
A
B
C
To view the portion that has been cut off
Operation with the Projector
Press the SCROLL ( ̆̄) buttons and scroll the projec-
tion image up or down.
Operation with the Remote Control
Press the SCROLL ( ̆̄) buttons and scroll the projec-
tion image up or down.
NOTE: When the orientation of the projection image is changed, even if the zoom function is in use, the display of the switched
screen will be adjusted to match the width, the same as with regular changes of orientation.
• Pressing the ZOOM (–) button permits display of a large portion within the read-
ing range of the vertical display. The undisplayed portion can be displayed with
the SCROLL ( ̆̄) buttons.
Enlarging and Reducing the Projection Image
This operation enlarges or reduces the size of projected image.
During OHP input, adjustment from the same size to 6.25 times (length ratio 2.5 times) is permitted, while during PC
or VIDEO input, adjustment from the same size to 16 times (length ratio 4 times) is permitted.
Operation with the Projector
Press the ZOOM button.
: Enlarge the size of the projected image
: Reduce the size of the projected image
Operation with the Remote Control
(+): Enlarge the size of the projected image
(–): Reduce the size of the projected image
Regular Operation