Citizen Systems CBM-290 - Manual (Page 22)

CITIZEN 22
l Auto paper cutter lock, paper jam.
Turn OFF power supply and clear the problem. To make printer ready for print, turn ON power again after
clearing the problem.
In this case, the print data which is remaining inside of print buffer is cleared due to power supply is
turned OFF. Absolutely, do not carry out clearing problem supplying power.
l Head-up condition
Pull down had up lever forward. Print head is pulled down and error signal is cleared, then printer becomes
ready for print.
l Heating up of print head temperature
When temperature of print head is getting high due to continuous printing etc., printer stops printing.
During temperature of print head is high, any operation is not available, keep printer without printing.
As soon as temperature of print head goes low, error signal is canceled automatically and printer becomes
ready for print.