Safety opera tion maintenance setup – Harbor Freight Tools Chicago 91938 User Manual
Page 9
Page 9
For technical questions, please call 1-800-444-3353.
SKU 91938
SAFETY
OPERA
TION
MAINTENANCE
SETUP
Depth Adjustment
Note: The Cutting Depth will need to be adjusted
whenever a worn down wheel is replaced with a new one.
1. Loosen the Nut (15) on the Depth Adjustment
Bolt (16) shown in
Figure D.
Figure D: Depth Adjustment
Depth
Adjustment
Bolt (16)
Nut (15)
2. Turn the Depth Adjustment Bolt (16) to change
the depth so that the wheel will not contact
the base at any time during cutting.
3. After adjustment, tighten the Nut (15) against the
Bracket (14) to lock the adjustment in place.
See also other documents in the category Harbor Freight Tools Power saws:
- 32206 (28 pages)
- 93012 (16 pages)
- 47613 (16 pages)
- 68298 (14 pages)
- 47003 (18 pages)
- 41345 (4 pages)
- 12" Compound Slide Miter Saw 91852 (27 pages)
- 92772 (16 pages)
- 46813 (37 pages)
- 94443 (14 pages)
- 93827 (15 pages)
- 37412 (9 pages)
- 98199 (20 pages)
- 93762 (33 pages)
- Drill Master 3733 (20 pages)
- 46225 (12 pages)
- CENTRAL MACHINERY 93380 (35 pages)
- METAL CUTTING BANDSAW 93762 (29 pages)
- 42654 (18 pages)
- 92386 (25 pages)
- Chicago Electric 4" Table Saw with 2 Blades 93211 (8 pages)
- 113 (8 pages)
- Drillmaster 6" Cut-Off Saw 69438 (16 pages)
- 41146 (1 page)
- 03733 (12 pages)
- 42307 (12 pages)
- 40315 (18 pages)
- Drillmaster 18v Cordless Reciprocating Saw 68240 (12 pages)
- 41453 (11 pages)
- 91852 (26 pages)
- 12" CERAMIC TILE CUTTER 68978 (4 pages)
- 42933 (19 pages)
- 47840 (11 pages)
- 41711 (8 pages)
- 46055 (13 pages)
- Metal Cutting Bandsaw 97099 (46 pages)
- 98089 (26 pages)
- Chicago 94560 (16 pages)
- 44829 (8 pages)
- 01624 (12 pages)
- 42818 (15 pages)
- 98194 (24 pages)
- Model 97007 (15 pages)
- Model 94245 (18 pages)