Compaq MP1800 - Manual (Page 15)

Getting Started 1-9
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 18 Words: 2604 Saved date: 05/17/004:43 PM File Name: Ch01
Connecting the Projector to a Compaq PC Companion
To connect the projector to a Compaq PC Companion, the PC
Companion must have a male connector adapter and a VGA-out PC
Card with a 15-pin connector.
✎
The VGA-out PC Card with the 15-pin
connector is not included with the Compaq
PC Companion. It is sold separately. For
information on purchasing this card, call
your Compaq authorized dealer or reseller.
To locate a reseller near you, call Compaq
at 1-800-AT-COMPAQ or visit the
Compaq web site at
http://www.compaq.com.
1. Rotate the elevator foot to balance the projector.
2. Connect one end of the signal cable
➊ to the projector and
connect the other end to the VGA-out PC Card. The VGA-out
PC Card may be inserted into the PC slot on the Compaq PC
Companion before or after connecting the signal cable.
✎ Be sure the signal cable aligns with the
connector. Do not force the cable onto the
connector or you may damage the signal
cable or the projector.