Compaq MP1800 - Manual (Page 13)

Getting Started 1-7
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 18 Words: 2604 Saved date: 05/17/004:43 PM File Name: Ch01
Connecting the Projector to a Desktop Computer
1. Rotate the elevator foot to balance the projector.
2. Connect one end of the projector signal cable
➊B to the
projector and the other end to the VGA connector on the
desktop computer and tighten the screws.
✎ If your computer has a digital connector,
connect one end of the digital flat panel
(DFP) signal cable
➊A to the digital
connector on the projector and the other
end to the digital connector on the
computer.
✎ Be sure the signal cable aligns with the
connector. Do not force the cable onto the
connector or you may damage the signal
cable or the projector.
3. Connect one end of the power cord
➋ into the back of the
projector, and the other end to an electrical outlet that is easily
accessible and close to the projector.