Casio Geometry - Manual (Page 13)

20060601
2-3
Drawing and Editing Objects
u To draw an infi nite line
1. Perform the following operation:
3(Draw) – 3:Infi nite Line.
2. Move the pointer to any location on the display and then press
w.
3. Move the pointer to another location on the display and then press
w.
• This will draw a line that passes between the two points.
u To drew a ray
1. Perform the following operation:
3(Draw) – 4:Ray.
2. Move the pointer to any location on the display and then press
w.
3. Move the pointer to another location on the display and then press
w.
• This will draw a ray that starts from the fi rst point you selected and that passes through
the second point.
u To draw a vector
1. Perform the following operation:
3(Draw) – 5:Vector.
2. Move the pointer to the location on the display from where you want to draw the vector
and then press
w.
3. Move the pointer to the location on the display to where you want to draw the vector and
then press
w.
• This draws the vector.