Dell LCD TV W3706MH - Manual (Page 32)

32 Troubleshooting Your TV
www
.de
ll
.co
m |
sup
por
t.d
e
ll
.c
om
General Problems
Problem Possible Solution
Poor picture quality while watching TV
and using a device such as a DVD
player or a VCR
1 Check the aspect ratio settings in the TV Menu. Press the Menu
button and select Size. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
2 Connect the device using a different connector. For example, if
you are experiencing the problem using a composite connector,
try using the component connector.
NOTE: To connect to a different connector, you need the
appropriate cables for that connector. See your device
documentation for a list of supported connections.
After you connect the device, change the input source in the TV
Menu. See "Input Select" on page 24 for more information.
3 Reset the original factory defaults. Press Menu button, select
Setup, and then select Factory Reset.
4 Adjust the color temperature. Press Menu button, select Picture
Settings, and then select Color Temperature.
NOTE: Some set top boxes offer aspect ratio. See your device
documentation for more information.
Poor picture quality when using a
device connected to the TV IN
(coaxial) connector
1 Ensure TV is selected as the input source in the Input Select
menu. See "Input Select" on page 24 for more information.
2 Press Menu buttton, select Setup, and then select Channel
Setup. This resets the channels on your TV.
3 Check the aspect ratio settings in the TV Menu. Press the Menu
button and select Size. For more information on using the TV
Menu, see "Using the TV Menu" on page 23.
4 Reset the original factory defaults. Press Menu button, select
Setup, and then select Factory Reset.
5 Adjust the color temperature. Press Menu button, select Picture
Settings, and then select Color Temperature.
6 The problem may be with your device, contact your service
provider.
W3202_3706MH_DAO_PROOF.book Page 32 Friday, October 7, 2005 2:26 PM