Dell POWEREDGE 1955 - Manual (Page 14)

12
Rack Installation Guide
3 At the back of the cabinet, pull back on the mounting-bracket flange until the mounting
holes align with their respective holes on the back vertical rail.
4 Install three 10-32 x 0.5-inch flange-head Phillips screws in the back mounting flange
to secure the rail assembly to the back vertical rail.
5 Repeat steps 1 through 4 for the rail assembly on the other side of the rack.
NOTE:
Ensure that the rails are mounted at the same vertical position on both sides of the rack.
Figure 1-6. Installing the VersaRails Rail Assemblies
Installing the System in the Rack
CAUTION:
If you are installing more than one system, install the first system in the lowest available
position in the rack.
CAUTION:
Never pull more than one component out of the rack at a time.
CAUTION:
Because of the size and weight of the system, never attempt to install the system in the rack
by yourself.
rail assembly
mounting-bracket
flange
front of rack
rail assemblies (2)
flange-head
Phillips screws (3)
vertical rail