Canon RS-CL07 - Manual (Page 24)

Adjust the Projection Angle
Turn on the projector, project an image, and then adjust the projection angle and screen slant angle.
● After completion of adjustment, tighten the screws and check that every fitting is secured firmly.
● Be sure to hold the projector from falling until the Ceiling-mount bracket and Base bracket are secured
firmly.
Adjust the horizontal projection angle
1 Loosen two wing screws (A). Move the
projector horizontally to adjust the horizontal
projection angle.
2 When the projector is correctly positioned,
tighten the wing screw.
Adjust the vertical projection angle
1 First loosen four screws (B) and then
loosen two wing screws (C). Move the
projector vertically to adjust the vertical
projection angle.
2 When the projector is correctly positioned,
first tighten the wing screws (C) and next
tighten the four screws (B).
Adjust the screen inclination
1 Loosen four screws (D), and then adjust
the slant angle of the projector.
2 When the projector is correctly positioned,
tighten the four screws (D).
Adjust the horizontal projection angle.
Adjust the vertical projection angle.
Adjust the screen slant angle.
5°
5°
20°
5°
10°
A
B
C D