Canon LV-7585 - Manual (Page 47)

47
Use the Point
better balance of contrast (from 0 to 15).
Gamma
Press the Point button to decrease the sharpness of the image;
press the Point button to increase the sharpness of the image
(from 0 to 31).
Sharpness
An interlaced video signal can be displayed in progressive mode.
Press the Point
Off . . . . Progressive scan mode is “Off.”
On . . . . Progressive scan mode is “On.”
Film . . . For watching a film. With this function, the projector
reproduces pictures faithful to the original film quality.
Noise interference on the screen can be reduced. Press the Point
Off . . . . Noise reduction mode is “Off”
On . . . . Noise reduction mode is “On”
Noise reduction =
Progressive =
Store icon
Press the OK button at this icon
to store the adjustment.
Press the Point button to lighten red/green/blue tone; press the
Point button to deepen red/green/blue tone (from 0 to 63).
White balance (Red/Green/Blue)
Press the Point button to lighten red/green/blue tone of the black
level of an image; press the Point button to deepen red/green/
blue tone of the black level of an image (from 0 to 63).
Offset (Red/Green/Blue)
Exit the Image Adjust Menu.
To store the adjusted data, move the red frame pointer to the Store
icon and press the OK button. The Image Level Menu appears.
Move the red arrow pointer to any of the Custom 1 to 10 in which
you want to set and press the OK button. A confirmation box
appears and then select [Yes].
To reset the adjusted data, select Reset and press the OK button. A
confirmation box appears and then select [Yes]. All adjustments will
return to their previous figures.
Reset
Store
Quit
Press the OK button at this icon to display
other items.
Press the OK button at this icon to
display the previous items.
Press the Point buttons to
adjust the setting value.
Picture Image
Image Level Menu
Move the red frame pointer to an
image item to be set and then press
the OK button.
Note:
• Displayed only in Video Input.
• When the White balance Red, Green, or Blue is adjusted, the Color
temp. level will change to “Adj.”
• The Film mode in the Progressive function cannot be selected
when the video signal format is 1080i or 1035i.
• Progressive cannot be selected when “480p,” “575p,” or “720p” is
selected (p.41).
=