Canon LV-7585 - Manual (Page 45)

45
Press the MENU button to display the On-Screen Menu. Use
the Point
Image Adjust Menu icon.
1
2 Use the Point ! buttons to move the red frame pointer to
the desired item and then press the OK button to display the
adjustment dialog box. Use the Point
the setting value.
IMAGE ADJUST MENU
Press the Point button to decrease contrast; press the Point
button to increase the contrast (from 0 to 63).
Press the Point button to decrease the brightness; press the
Point button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point button to decrease the intensity of the color;
press the Point button to increase the intensity of the color (from
0 to 63).
Press the Point
proper color balance (from 0 to 63).
Color =
Tint =
Color Management
The Color Management function can be used to adjust the LEVEL,
PHASE, and GAMMA of the selected display colors (except for
black, white, and gray) on the screen and replace these colors with
other colors if required.
You can store up to eight (8) color management data.
1 Use the Point ! buttons to move the red frame pointer
to Color Management, and then press the OK button. The
projected image freezes, and the COLOR MANAGEMENT
POINTER appears.
Use the Point !
spot where you want to adjust the color and then press the
OK button. The COLOR SELECTION window appears, and
the color in the center of the pointer is selected and you can
adjust the color.
2
Use the Point !
PHASE of the color, and then press the OK button to confirm
the setting. Then use the Point
! buttons to adjust the
GAMMA for the color and press the OK button to accept
the setting. After adjusting, press the OK button to go to the
COLOR MANAGEMENT LIST.
3
COLOR MANAGEMENT
POINTER
POINTER MODE
Image Adjustment
Move the red frame pointer to the desired
item and then press OK button.
Image Adjust Menu icon
Use the Point buttons to adjust the
setting value.
COLOR SELECTION MODE
Go to the COLOR MANAGEMENT LIST.
LIST
Picture Image
Note:
• Displayed only in Video Input.
• Tint cannot be selected when the video system
is PAL, SECAM, PAL-M, or PAL-N (p.41).
=