FRIGIDAIRE Affinity Washer FAHE1011MW - Manual (Page 11)

11
fabric softener (on select models)
If your model is equipped with an automatic fabric
softener dispenser, you must turn the fabric softener
switch to the “on” position for correct operation. See
Care and Cleaning for dispenser cleaning procedures.
energy saver (on select models)
The energy saver option reduces water temperature to
save energy, lowers water usage slightly and also extracts
more water to reduce drying time.
extra spin (on select models)
Use this option to add minutes to the fi nal spin. This will
improve water extraction, decrease drying time and save
energy.
fresh rinse
Use this option when additional rinsing is desired to
remove excess dirt and detergent. It is recommended
for heavily soiled loads or if household members have
sensitive skin.
chime (on select models)
A signal will sound at the end of the cycle if this option is
selected.
Water Level (on select models, automatic on others)
Turn the water level knob (on select models) to select a
water level appropriate for the load size. For best results,
DO NOT overload. Add items loosely to the tub. The dry
load should not be higher than the top row of holes in the
wash tub. There should be enough water in the tub for
items to move freely.
Í NOTE
If auto water level is selected, the washer will perform
a dry load sensing procedure before adding water to
the tub. The sensing indicator light will be lit.
Soil Level (on select models)
OPERATING INSTRUCTIONS
Water level is automatically calculated by the washer on
models without a water level knob.
Cycle Options Cycle Settings, continued
Adjust duration of agitation time based on the soil level
of each load. Heavy, normal, and light soil levels are
available on all models that have an adjustable soil level.
Some models also include extra light and stain treat.
Stain treat gives your cycle the agitation time of a
heavy selection plus the added benefi t of a mid agitation
soak.