Baumer BA DenexGripperLED - Manual (Page 17)

User Manual DENEX Gripper LED 17/24 Baumer Electric AG
Version 2013-02, V1.4 www.baumer.com Frauenfeld, Switzerland
10 MAINTENANCE AND REPAIRS
Before any adjustments or maintenance is carried out on the DENEX Gripper LED, make
sure to follow the instructions below:
Switch off the power by removing the power plug. Never stare into the LED aperture
for a long time!
10.1 Maintenance at Regular Intervals
To ensure the best operation, by following the steps above:
•
Clean the glass aperture with alcohol
•
Remove any loose pieces of paper that can produce false counts
•
Check that the target is mounted the way it should be
11 RETURNING EQUIPMENT
If it is necessary to return a DENEX Gripper LED for repair, the following procedure should
be followed.
1. Tag the unit with the following:
•
Company and contact person returning the item
•
Phone, fax or email to the contact person for additional information
•
Helpful information regarding the malfunction. A good description reduces
trouble shooting cost.
If the unit has been disassembled, reassemble it, making certain that all hardware is in
place. Missing parts will be charged at spare part prices.
2. Carefully pack the unit and apply appropriate cautionary stickers.
3. Advice way of returning the unit: Post (DPD), UPS, DHL or other.
4. Return unit to your dealer or directly to Baumer (see address on back page).