Citizen Systems iDP3423 - Manual (Page 94)

iDP3420/3421/3423 User’s Manual
78 CITIZEN
ESC BEL n1 n2
[Function] Setting the external device drive pulse width
[Code] <1B>H <07>H n1 n2
[Range] 1
≤
n1
≤
127
1
≤
n2
≤
127
[Outline] This command sets the power-on time to drive an external device(Cash drawer).
Power-on time = n1
×
10 (ms)
Delay time = n2
×
10 (ms)
To actually drive the drawer, use the and commands.
[Default] n1 = n2 = 20 (200ms)
BEL
[Function] Driving command A for drawing-1
[Code] <07>H
[Outline] This command drives the drawer connector no. 2 pin under the condition set with the
n1 n2 command. This command is executed in order of entry into the input
buffer.