Vermont Casting A052041 - Manual (Page 9)

Assembly Instructions
Chapter
2
Getting Started
1. Please follow the steps in the order that
they are presented.
2. Assemble the grill where you plan to
use it.
3. You may want to place an old towel or
cloth at the assembly site to prevent nuts
and bolts from becoming lost.
4. Have a friend help. An assistant can
make the assembly easier by holding the
parts in place while you fasten the nuts and
bolts.
5. To be ready to barbecue immediately,
obtain a filled L.P. gas cylinder from an
authorized L.P. dealer or cylinder exchange
center.
Unpacking the Grill Parts
1. Remove and set aside all inner boxes
and parts from the master carton.
2. Remove and set aside all wrapping
paper and additional packaging from the
parts.
3. Do not destroy carton or packing until
your grill is completely assembled and oper-
ating to your satisfaction.
Tools needed to assemble grill:
• 3/8” open-end wrench*
• flat blade screwdriver
• 7/16" open-end wrench*
*HINT: A socket set or an adjustable
wrench may be used instead.
10
Model A052041 Series