Vermont Casting A052041 - Manual (Page 19)

20
Assembly Instructions • Assemble the Grill Lid
tools needed:
7/16" open-end wrench
flat-blade screwdriver
handle standoff
( 2 )
handle
( 1 )
1. Position the back of the lid so that the rear
holes are in line with the hinge struts on
the back of the grill bottom.
2. Gently set the grill lid onto the grill bottom.
hairpin ( 2 )
use
hardware bag “D”:
1/4-20 x 3/4”
bolt ( 4 )
standoff
gasket
( 2 )
1/4-20
hex nut ( 2 )
hinge pin
1/4 x 1 1/8”
( 2 )
grill lid
( 1 )
Locate these parts: