Vermont Casting A052041 - Manual (Page 20)

7. Raise the lid to attach the front handle.
8. Attach a handle standoff to the front of
the grill lid, as shown.
9. Insert one end of the handle into the hole
of the standoff.
10.Place other standoff onto handle and
while holding the handle in place assem-
ble the opposite standoff to the lid in the
same manner.
3. Hold the lid to align the hinge holes.
4. Insert a hinge pin through the hinge hole
in the lid and into the hole in the bottom
hinge strut.
5. After the hinge pin is in place, insert a
hair pin through the hole of the hinge pin
to secure it.
HINT: There is an air space between the
back of the lid and the grill bottom where
you can install the pins.
6. Repeat for the opposite side.
4.
3 .
5.
21