Casio G'zOne Rock - Manual (Page 115)

114
SETTINGS & TOOLS
Direction readings taken in any of the following locations may
result in a large margin of error.
Near buildings (especially ferro-concrete structures), large
metal objects (trains, motor vehicles, etc.), high-voltage power
lines, or overhead wires
Near metal objects (desks, lockers, etc.), household appliances
(TVs, computers, speakers, etc.), or permanent magnets
(magnetic necklaces, etc.)
If you suspect a reading error, move away from the above
locations and try again.
•
-
-
Walking Counter
In Pedometer mode, the number of steps you walked in a day is
measured with the pedometer to display the distance you walked and
the estimated amount of calories you burned.
In Virtual Trek mode, the amount of trail you traveled is displayed
based on the distance calculated from the number of steps. The
current position on the trail, the achieved percentage, and the
milestones on the trail are displayed on the screen.
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Tools, G’zGEAR, Walking Counter.
2. The following keys are available in the WALKING COUNTER:
Directional Key ' left or right: Switches the mode.
Directional Key " up or down: Selects the date.
Center Select Key [WEEK/MONTH/DAY]: Switches to display
the total number of steps walked by weeks, months or days.
(Only in Pedometer mode)
Right Soft Key [Options]: Displays the following options:
About: Displays the description of the Walking Counter tool.
Pedometer: Switches to Pedometer mode.
Virtual Trek: Switches to Virtual Trek mode.
•
•
•
•