Video entertainment system (ves™), System operation, Operation of the remote – Dodge 2015 Journey - User Guide User Manual
Page 77: Auxiliary audio/video input jacks, Video entertainment system, Ves™)
VIDEO ENTERTAINMENT SYSTEM (VES™)
System Operation
• The screen is located on the headliner behind the front seat. To lower the screen, press
the release button located in the rear of the overhead console.
• The system may be controlled by the front seat occupants using the touchscreen radio,
or by the rear seat occupants using the remote control.
• The video screen displays information in a split-screen format. The left side of the
screen is referred to as Channel 1 and the right side of the screen is referred to as
Channel 2. All modes except video modes are displayed in a split-screen format.
• To use the headphones, press the power button located on the right ear cup. Select the
channel on the headphones (1 or 2) that corresponds to the channel selected on the
VES™ screen.
Operation Of The Remote
The remote control operates similarly to any DVD remote you have used before and allows
the rear seat passengers to change stations, tracks, discs and audio/video modes and is
designed to control either channel by using the selector switch located on the right side of
the remote.
• Select an audio channel (Rear 1 for driver's side rear screen and Rear 2 for passenger's
side rear screen), then press the “source” button and using the up and down arrows,
highlight disc from the menu and press the “OK” button.
• Press the popup/menu button to navigate the disc menu and options.
Pressing the MODE button causes the Mode Selection menu to appear on the VES™
screen. Use the remote control arrow buttons to scroll through the available modes, then
press ENTER to select the desired mode.
Pressing the power button will turn the VES™ system ON/OFF.
Auxiliary Audio/Video Input Jacks
• The Aux jacks are located on the rear of the center console.
• Connect the video game or other external media devices to the AUX jacks following the
color coding for VES™ jacks.
• Using either the touchscreen radio or remote control, select AUX from the Rear VES™
Control or Mode Selection screen.
• Refer to your vehicle's Owner’s Manual on the DVD for further details.
E L E C T R O N I C S
75