beautypg.com

Electronic speed control, Cruise on/off, Accel/decel – Dodge 2015 Journey - User Guide User Manual

Page 40

background image

ELECTRONIC SPEED CONTROL

The Electronic Speed Control switches are located on the steering wheel.

Cruise ON/OFF

• Push the ON/OFF button to activate the

Speed Control.

NOTE:

CRUISE

will appear on the instrument

cluster to indicate the Speed Control is on.
• Push the ON/OFF button a second time

to turn the system off.

SET

With the Speed Control on, push and re-
lease the SET – button to set a desired
speed.

Accel/Decel

To Increase Speed

When the Electronic Speed Control is set,
you can increase speed by pushing the RES

+

button.

The drivers preferred units can be selected through the instrument panel settings if
equipped. The speed increment shown is dependant on the chosen speed unit of U.S.
(MPH) or Metric (km/h):

U.S. Speed (MPH)

• Pushing the RES

+

button once will result in a 1 MPH increase in set speed. Each

subsequent tap of the button results in an increase of 1 MPH.

• If the button is continually pushed, the set speed will continue to increase until the

button is released, then the new set speed will be established.

Metric Speed (km/h)

• Pushing the RES

+

button once will result in a 1 km/h increase in set speed. Each

subsequent tap of the button results in an increase of 1 km/h.

• If the button is continually pushed, the set speed will continue to increase until the

button is released, then the new set speed will be established.

Electronic Speed Control Switches

1 — Push On/Off

2 — Push Resume/Accel

3 — Push Set/Decel

4 — Push Cancel

O P E R AT I N G Y O U R V E H I C L E

38