beautypg.com

Adding washer fluid – Dodge 2015 Journey - Owner Manual User Manual

Page 568

background image

3. Grab the bottom of the wiper blade and rotate it

forward to unsnap the blade pivot pin from the wiper

blade holder.

4. Install the wiper blade pivot pin into the wiper blade

holder at the end of the wiper arm, and firmly press

the wiper blade until it snaps into place.

5. Lower the wiper blade and snap the pivot cap into

place.

Adding Washer Fluid

The windshield washer and the rear window washer

share the same fluid reservoir. The fluid reservoir is

located in the engine compartment. Be sure to check the

fluid level in the reservoir at regular intervals. Fill the

reservoir with windshield washer solvent (not radiator

antifreeze) and operate the system for a few seconds to

flush out the residual water.
When refilling the washer fluid reservoir, apply some

washer fluid to a cloth or towel and wipe the wiper

blades clean. This will help blade performance.

1 — Wiper Blade
2 — Blade Pivot Pin
3 — Wiper Arm
4 — Wiper Blade Holder

566 MAINTAINING YOUR VEHICLE