Overdrive operation – Dodge 2015 Journey - Owner Manual User Manual

Page 430

3. Turn the ignition switch to the LOCK/OFF position.
4. Wait approximately 10 seconds.
5. Restart the engine.
6. Shift into the desired gear range. If the problem is no

longer detected, the transmission will return to normal

operation.

NOTE:

Even if the transmission can be reset, we recom-

mend that you visit your authorized dealer at your

earliest possible convenience. Your authorized dealer has

diagnostic equipment to determine if the problem could

recur.
If the transmission cannot be reset, authorized dealer

service is required.

Overdrive Operation
The automatic transmission includes an electronically

controlled Overdrive (top gear). The transmission will

automatically shift into Overdrive if the following con-

ditions are present:

• The shift lever is in the DRIVE position.
• The transmission fluid has reached an adequate tem-

perature.

• The engine coolant has reached an adequate tempera-

ture.

• The vehicle speed is sufficiently high.
• The driver is not heavily pressing the accelerator.

428 STARTING AND OPERATING