beautypg.com

Esc activation/malfunction indicator light and, Esc off indicator light – Dodge 2015 Journey - Owner Manual User Manual

Page 449

background image

WARNING!

When in “Partial Off” mode, the TCS functionality

of ESC (except for the limited slip feature de-
scribed in the TCS section) has been disabled and
the “ESC Off Indicator Light” will be illuminated.
When in “Partial Off” mode, the engine power
reduction of TCS is disabled, and the enhanced
vehicle stability offered by the ESC system is
reduced.

Trailer Sway Control (TSC) is disabled when the

ESC system is in the “Partial Off” mode.

ESC Activation/Malfunction Indicator Light And
ESC OFF Indicator Light

The “ESC Activation/Malfunction Indicator

Light” in the instrument cluster will come on

when the ignition switch is turned to the ON

position. It should go out with the engine running. If the

“ESC Activation/Malfunction Indicator Light” comes on

continuously with the engine running, a malfunction has

been detected in the ESC system. If this light remains on

after several ignition cycles, and the vehicle has been

driven several miles (kilometers) at speeds greater than

30 mph (48 km/h), see your authorized dealer as soon as

possible to have the problem diagnosed and corrected.
The “ESC Activation/Malfunction Indicator Light” (lo-

cated in the instrument cluster) starts to flash as soon as

the tires lose traction and the ESC system becomes active.

The “ESC Activation/Malfunction Indicator Light” also

flashes when TCS is active. If the “ESC Activation/

Malfunction Indicator Light” begins to flash during ac-

celeration, ease up on the accelerator and apply as little

throttle as possible. Be sure to adapt your speed and

driving to the prevailing road conditions.

5

STARTING AND OPERATING 447