Dodge 2015 Dart - Owner Manual - Manual (Page 337)

2. Push the accelerator pedal fully, slowly, three times
within 10 seconds.
3. Cycle the ignition to the OFF/LOCK position.
Vehicles Not Equipped With Keyless Enter-N-Go™
1. Turn the ignition switch to the ON/RUN position (do
not start the engine).
2. Push the accelerator pedal fully, slowly, three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
Using The EVIC Menu
Vehicles Equipped With Passive Entry
• Without pushing the brake pedal, push the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (Do not start the engine.)
• Push and release the DOWN arrow button to
scroll downward through the main menu to “Ve-
hicle Info”.
• Push and release the RIGHT arrow button to
access the ”Oil Life” screen.
• Push and hold the RIGHT arrow button to reset
the gauge and numeric display to 100% for ”Oil
Life.”
• Push and release the Up arrow button to exit the EVIC
screen.
Vehicles Not Equipped With Passive Entry
• Without pushing the brake pedal, cycle the ignition to
the ON/RUN position (Do not start the engine.)
• Push and release the DOWN arrow button to
scroll downward through the main menu to “Ve-
hicle Info”.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 335