beautypg.com

To activate, To deactivate, Daytime running lights (drl) – Dodge 2015 Dart - Owner Manual User Manual

Page 246: Lights-on reminder

background image

To Activate

1. Turn the headlight switch to the AUTO headlight

position.

2. Push the multifunction lever away from you (toward

front of vehicle) to engage the high beam mode.

NOTE:

This system will not activate until the vehicle is

at or above 15 mph (24 km/h).
To Deactivate

1. Pull the multifunction lever toward you (or rearward

in car) to manually deactivate the system (normal

operation of low beams).

2. Push back on the multifunction lever to reactivate the

system.

Daytime Running Lights (DRL)

The Daytime Running Lights will come on whenever the

ignition is placed in the RUN position, the headlights are

off and the parking brake is off. The headlight switch

must be used for normal nighttime driving.
NOTE:

The Daytime Running Lights can be turned on

and off using the Uconnect® System, refer to “Uconnect®

Settings” in “Understanding Your Instrument Panel” for

further information.

Lights-On Reminder

If the headlights or parking lights are on after the ignition

is placed in the OFF position, a chime will sound to alert

the driver when the driver’s door is opened.

244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE