NISSAN 2015 Rogue - Owner's Manual - Manual (Page 389)

Checking tire pressure
1. Remove the valve stem cap from the
tire.
2. Press the pressure gauge squarely
onto the valve stem. Do not press too
hard or force the valve stem side-
ways, or air will escape. If the hissing
sound of air escaping from the tire is
heard while checking the pressure,
reposition the gauge to eliminate this
leakage.
3. Remove the gauge.
4. Read the tire pressure on the gauge
stem and compare to the specifica-
tion shown on the Tire and Loading
Information label.
5. Add air to the tire as needed. If too
much air is added, press the core of
the valve stem briefly with the tip of
the gauge stem to release pressure.
Recheck the pressure and add or
release air as needed.
6. Install the valve stem cap.
7. Check the pressure of all other tires,
including the spare.
Size Cold Tire Inflation
Pressure
Front and Rear
Original Tire:
225/65R17 102H
33 PSI, 230 kPa
Front and Rear
Original Tire:
225/65RF17
100H
33 PSI, 230 kPa
Front and Rear
Original Tire:
225/60R18 100H
33 PSI, 230 kPa
Spare Tire:
T155/90D17
101M
60 PSI, 420 kPa
Spare Tire:
T145/90D16
106M
60 PSI, 420 kPa
LDI0393
8-34 Maintenance and do-it-yourself