NISSAN 2013 Quest - Owner's Manual - Manual (Page 426)

Black plate (422,1)
[ Edit: 2013/ 3/ 26 Model: E52-D ]
8-18 Maintenance and do-it-yourself
SDI2694
REPLACING
Replace the wiper blades if they are worn.
1. Pull the wiper arm.
2. Release the lock tab *
1 and then move the
wiper blade *
2 as illustrated.
3. Remove the wiper blade.
4. Insert the new wiper blade onto the wiper
arm until it clicks into place.
Contact a NISSAN dealer for wiper blade rubber
replacement.
CAUTION
. After wiper blade replacement, re-
turn the wiper arm to its original
position; otherwise it may be da-
maged when the hood is opened.
. Make sure the wiper blades contact
the glass; otherwise the arm may be
damaged from wind pressure.
SDI2693
Be careful not to clog the washer nozzle *
A .
This may cause improper windshield washer
operation. If the nozzle is clogged, remove any
objects with a needle or small pin
*
B . Be
careful not to damage the nozzle.
Condition: