NISSAN 2012 Quest - Owner's Manual - Manual (Page 62)

Black plate (59,1)
[ Edit: 2011/ 10/ 27 Model: E52-D ]
2. Secure the tether strap to the tether anchor
point on the back of each seatback behind
the child restraint.
3. Tighten the tether strap according to the
manufacturer’s instructions to remove any
slack. Make sure the head restraint or
headrest does not contact the top tether
strap.
If you have any questions when installing a
top tether strap on the rear seat, consult
your NISSAN dealer for details.
SSS1168
3rd row seat
INSTALLING TOP TETHER STRAP (3rd
row seat)
WARNING
In the 3rd row seat, a child restraint with
a top tether strap can only be used in
the center and right side position. Do
not place in the left side seating posi-
tion and attempt to angle the tether
strap to the center or right side posi-
tion.
The center and right side position of the 3rd row
seat is the seating position that can use a top
tether strap.
First, secure the child restraint with the seat belt,
as applicable.
1. Position the top tether strap over the top of
the center and right side seating position
seatback.
2. Secure the tether strap to the tether anchor
point on the floor behind the child restraint.
3. Refer to the appropriate child restraint
installation procedure steps in this section
before tightening the tether strap.
If you have any questions when installing a
top tether strap child restraint on the rear
seat, consult your NISSAN dealer for de-
tails.
Safety — Seats, seat belts and supplemental restraint system 1-43